Bob Smith Industries 102 Insta-Cure Super Thin CA Glue 1oz
Insta-Cure has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam.
At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.
Directions for use
Unscrew top from nozzle. For finer applications, use the extender tip. Insta-Cure™ CA is used to bond tight fitting parts. Hold the parts together (sometimes using masking tape), then apply the Insta-Cure™ along the joints. The CA will penetrate deep into the joints. Bonding will occur in 1-3 seconds. Excess cured CA can be removed from surfaces like ceramics by rubbing with a paper towel soaked in Un-Cure™. Full strength is reached in two hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220º F. Soak extender tip in acetone for cleaning.
Features
- Waterproof: The glue provides waterproof bonding for wood projects.
- Thin and Fast Drying: The glue dries quickly in just a few minutes for fast project completion.
- Blue Color: The glue has a blue color that matches many woodworking projects.
- 1 Fluid Ounce Bottle: The glue comes in a 1 fluid ounce bottle for small to medium woodworking projects.
- Compatible with Wood: The glue works with wood, plastic, metal, and other materials for bonding.
Specifications
- Specific Uses For Product Model, Woodworking, Repair
- Item Form Liquid
- Other Special Features of the Product Fast Drying
- Container Type Bottle
- Full Cure Time 2 Hours
- Water Resistance Level Waterproof
- Viscosity Level Low
- Compatible Material Wood
