Short answer: for brushes, pick the Army Painter Most Wanted Brush Set (Regiment, Insane Detail and Small Drybrush). For glue, pick Bob Smith Industries Maxi-Cure Extra Thick, a clear, extra-thick super glue that suits plastic model assembly. For tools, start with the Army Painter Hobby Tool Kit. Add a primer to finish the setup, and our paint sets guide covers the paints.
Updated November 18, 2026. Every item on this page was in stock at Saga Concepts when we last updated it. What is in each pack comes from the product listing and the maker’s own notes.
Our top 3 picks
| Pick | Product | Why |
|---|---|---|
| Best brush set | The Army Painter Most Wanted Brush Set | 3 brushes for base coating units, tiny details and quick drybrush highlights. |
| Best glue for miniatures | Bob Smith Industries Maxi-Cure Extra Thick (1oz) | A clear, extra-thick cyanoacrylate glue for plastic model assembly and hobby repairs. |
| Best all-in-one tool box | The Army Painter Hobby Tool Kit | Basic assembly tools, a 5g Super Glue, a tool safety guide and a painting guide in one box. |
Brushes, primers, glue and tools compared
| Product | Best for | What is inside |
|---|---|---|
| Army Painter Most Wanted Brush Set | Base coating, tiny details, drybrushing | 3 brushes: Regiment, Insane Detail, Small Drybrush |
| Army Painter GameMaster Character Brush Set | RPG characters and creatures | 3 brushes: Small Detail, Monstrous, Drybrush |
| Monument Hobbies Pro Acryl PRIME Brush-On Black | Priming with a brush | 22ml brush-on black primer |
| Army Painter Color Primer, Wolf Grey | Primer and base coat in one | 400ml acrylic spray undercoat |
| BSI Maxi-Cure Extra Thick | Plastic model assembly | 1oz extra-thick cyanoacrylate |
| BSI Insta-Cure+ Gap Filling | Loose joints | 1oz medium-viscosity cyanoacrylate |
| BSI Insta-Cure Super Thin | Tight-fitting joints | 1oz water-thin cyanoacrylate |
| Army Painter Hobby Tool Kit | Assembling an army | Basic tools, 5g Super Glue, guides |
| Army Painter Frame Cutter | Cutting parts off the sprue | Sharp, thin, precise cutter |
| Army Painter Stainless Steel Hobby Knife | Removing mould lines | 1 knife and 5 extra blades |
|
Get first word on new arrivals Pick what you want to hear about in the form below and we will tell you when it arrives at Saga. |
The best brushes, primers, glue and tools, pick by pick
Brushes
1. Army Painter Most Wanted Brush Set: best brush set
- What is inside: 3 brushes (Regiment, Insane Detail and Small Drybrush), with synthetic Toray and natural red sable bristles.
- Who should buy it: painters who want one set for base coating units, tiny details and quick drybrush highlights.
- Skip it if: you need to drybrush large terrain. The Army Painter points those painters to its Wargamer Vehicle & Scenery brush.
2. Army Painter GameMaster Character Brush Set: best for RPG miniatures
- What is inside: 3 brushes (Small Detail, Monstrous and Drybrush) with triangular handles for comfort.
- Who should buy it: anyone painting characters and creatures for tabletop RPGs.
- Skip it if: you want to drybrush large terrain. The Army Painter points those painters to its Wargamer Vehicle & Scenery brush.
Primers
3. Monument Hobbies Pro Acryl PRIME Brush-On Black Primer: best for priming with a brush
- What is inside: 22ml of Brush-On Black primer from the Monument Hobbies Pro Acryl PRIME range.
- Who should buy it: painters who want to prime with a brush instead of a spray.
- Skip it if: you want a spray. Look at the Army Painter Color Primer below.
- Also: the Brush-On White Primer, and our guide Pro Acryl explained.
4. Army Painter Color Primer, Wolf Grey: best primer and base coat in one
- What is inside: A 400ml acrylic spray undercoat that works as primer and base coat at once, on metal, plastic and resin models and miniatures, with a matt finish.
- Who should buy it: painters who want to prime and base coat a model in one go.
- Skip it if: you prefer to prime with a brush.
- Other colors: browse Primers.
Glue
5. Bob Smith Industries Maxi-Cure Extra Thick: best glue for miniatures
- What is inside: 1oz of clear, extra-thick cyanoacrylate glue. It bonds plastic, metal, rubber, fiberglass, ceramics and hardwood, and works well with Insta-Set accelerator for faster curing.
- Who should buy it: plastic model assemblers and anyone making hobby repairs. A thicker formula helps hold parts in place before it fully cures.
- Skip it if: you need glue to wick into tight joints. The thin Insta-Cure is made for that.
- Read more: Why BSI cyanoacrylate is the professional choice for Warhammer, Gunpla and beyond. If glue lands where it should not, the Un-Cure Debonder softens cured CA glue; use care, since it can soften some plastics too.
6. Bob Smith Industries Insta-Cure+ Gap Filling: best for loose joints
- What is inside: 1oz of clear, medium-viscosity cyanoacrylate that sets in about 5 to 15 seconds. It bonds balsa, soft wood, hard wood, glass, metal, fiberglass, ceramics, hard plastics and rubber.
- Who should buy it: builders who need a glue that bridges gaps where a thin glue would run.
- Skip it if: your parts fit tightly. A thinner glue will do.
7. Bob Smith Industries Insta-Cure Super Thin: best for tight-fitting joints
- What is inside: 1oz of water-thin cyanoacrylate glue that wicks deep into tight-fitting joints by capillary action and cures in just a few seconds.
- Who should buy it: builders with tight-fitting parts. Hold the pieces in place and run the glue around the edges of the seam.
- Skip it if: your parts have gaps. Thin glue needs surfaces that fit tightly together.
Hobby tools
8. Army Painter Hobby Tool Kit: best starter tool box
- What is inside: A 7-piece box of basic assembly tools, a free 5g Super Glue, a guide to tool safety and the Army Painter Technique Painting Guide.
- Who should buy it: wargamers building their first army. The Army Painter designed it as a “one box fits all” kit.
- Skip it if: you want to paint. The kit is for assembly, so pair it with brushes and paints.
9. Army Painter Frame Cutter: best for removing parts from the sprue
- What is inside: A sharp, thin and precise plastic frame cutter for taking models off the sprue.
- Who should buy it: anyone building plastic models. It is also good for trimming and converting.
- Skip it if: you already own the Hobby Tool Kit, which covers basic assembly tools.
10. Army Painter Stainless Steel Hobby Knife: best for mould lines
- What is inside: 1 hobby knife with a soft rubber-coated grip, 5 extra scalpel blades and a protective head cover.
- Who should buy it: miniature painters who need to remove mould lines and make precision cuts in plastic, resin and metal pieces.
- Skip it if: you want a hands-off tool for cutting from the sprue. The Frame Cutter is the better fit.
- Also: the Precision Tweezers Set has 2 different tweezers for fiddly assemblies and precise gluing.
What should you buy first?
- Just starting out: Hobby Tool Kit, a brush set, a primer and a glue.
- Gluing plastic models: Maxi-Cure Extra Thick for most joints, Insta-Cure Super Thin for tight seams.
- Painting RPG minis: GameMaster Character Brush Set.
- Paints to go with them: see our Army Painter paint sets guide. Citadel painters can browse Citadel Tools & Brushes.
- More brands: Brushes, Primers, Glue, Vallejo and AK Interactive.
Brushes, primers and glue questions
What are the best brushes for miniature painting?
A set that covers the basics is a good start. The Army Painter Most Wanted Brush Set has a Regiment, an Insane Detail and a Small Drybrush for base coating, tiny details and drybrushing.
What is the best paint brush for miniatures?
It depends on the job. The Army Painter sells brushes for different tasks, from Super Detail for the smallest jobs to Basecoating for the bulk of an infantry unit, so pick the size that matches what you are painting.
What is the best glue for miniatures?
For plastic models, Bob Smith Industries Maxi-Cure Extra Thick is a clear, extra-thick cyanoacrylate glue that bonds plastic and metal. For tight-fitting joints, BSI Insta-Cure Super Thin wicks into the seam.
Should I prime with a brush or a spray?
Either works. Monument Hobbies Pro Acryl PRIME is a brush-on primer, and the Army Painter Color Primer is an acrylic spray that works as primer and base coat in one.
What tools do I need to start building miniatures?
The Army Painter Hobby Tool Kit has the basic assembly tools, a 5g Super Glue and guides. A frame cutter for the sprue and a hobby knife for mould lines are useful extras.
Keep reading
- Best Army Painter paint sets and hobby kits
- Why BSI cyanoacrylate is the professional choice
- Monument Hobbies Pro Acryl explained
- Gifts for miniature painters
Questions about hobby supplies? Email help@sagaconcepts.com and our team will help.
Product images © The Army Painter, Monument Hobbies and Bob Smith Industries.









